RpmRush content is created by car enthusiasts just like you.
If you love cars and writing you are welcome to Join Us
Car parts & accessories | 12.06.2014 - 04:03

How to use 468 Key Pro III key programmer?

468 key pro III ID46 chip copy machine from China obd2repair.com. 468 key pro III key programmer used to copy ID46 chips. 468 key pro III transponder key maker can read and write ID46 chips information.
468 Key Pro III
468 Key Pro III

468 Key Pro III third generation Key Programmer for ID46 Chip Copy. It language is English. Do you know to use the 468 key pro III ID46 chip copier? Today, OBDII repair will tell you...

1. Turn on the Left switch of 468 KEY PRO third generation, after turn on it, the main interface pops up. Then click COPY. copy46

2. Click CMT46 collect Upper left corner of the screen.

3. This page is a copy of the ID46-chip page, now it is copying  ID46 chip.

  
3.1.Put the original chip  vertically into the bottom right corner of the hole, click on read UID. Note: Do not going to be flat on the hole nearby, this is not easy to read information inside the chip.

  
3.2.Put the new key vertically into the bottom right corner of the hole, click on Conf ig. Note: Do not going to be flat on the hole nearby, this is not easy to read information inside the chip.

  
3.3.Use new car key collect information in car,first of all,take a key blank, put the new key into the key blank, insert the car key hole, four consecutive starts,each time interval of 3-5 seconds

  
3.4.Put the key which already collected information vertically into the bottom right corner of the hole, click on read. Screen will appear a set of random number and signature.

4.After crack Original key , put the original key hole vertically into the bottom right corner, click on crack, the screen will display the progress of the original key crack.

5.New key copy. Put the key which already collected information vertically into the bottom right corner of the hole, click on Copy. Screen will display copy successfulmessage.

6.If in the process, chip key copy failed, put the key into bottom right corner of the hole, click on Initialize, restart again from the first step.

This transponder key programmer 468 key pro III is ID46 chips copier, if you need some help or have any advice on it, pls feel free to contact OBD2Repair--China auto parts center.

Report article    Feedback
Related articles